EXTERNAL
EXTREME CROSSOVER:
Response Audio / Bella EXtreme has developed a new external
crossover for the Adagio EXtreme. Using Speak-On connectors at both
ends, the external crossover will be connected to the loudspeaker
cabinet via custom made umbilical cords utilizing the same high
quality cabling used within the speaker cabinet itself. High quality
5 way binding post are utilized at the external crossover enclosure
for connection of your speaker wire.
Standard umbilical cord length on floorstanding speakers is 36
inches. Longer cords available upon request.
With
the EXternal EXtreme crossovers we are able to to utilize many
audiophile grade components that we were not previously able to
install internally. You have your choice of components used in these
crossovers from SoniCaps, Mundorf Silver/Oil to the ModWright OIMP
and Teflon which are the very same as the we have been building for
our EXtreme Adagio loudspeakers that have received glowing reviews
and customer feedback.
The
Adagio EXtreme utilizes completely new, enhanced crossovers using
components that bring the full potential of these speakers to the
surface. The EXtreme crossovers are not simply a replacement of a
few capacitors with larger pieces rather custom built from the
ground up. We do not reuse any original components in the signal
path or the original printed circuit board.
The
low pass filter utilizes the highest quality Erse low DCR air core
inductors for a fast, accurate and deep response, high quality film
capacitors and non-inductive resistors.
The
high pass filter is assembled using top quality components depending
on the presentation you are seeking. You will have your choice of
SoniCap capacitors with Teflon bypass, Mundorf Silver/Oil or
proprietary ModWright Instruments' Oil-Impregnated Polypropylene as
well as Teflon film capacitors.
Other
components found in the high pass filter are non-inductive
audiophile resistors, high quality Erse air core inductors and Erse
polypropylene and polyester capacitors.
The
crossovers are assembled on 1/2" Baltic Birch Ply boards eliminating
the original single printed circuit board. Two separate boards are
required due to the large physical size of the audiophile grade
components we use. All connections are point-to-point wired for the
shortest possible signal path.
The
single wire input connection into the crossover enclosure is made
through a pair of high quality speaker binding post. Everything is
tied together using only the highest quality internal wiring.
Don't
own a pair of Adagio Speakers? Want to? You can purchase a new pair
from Response Audio or a used pair from AudioGon at a great savings
off retail and have them shipped direct to us for the EXternal
EXtreme upgrades. There is a very good chance you could end up with
a pair of EXternal EXtreme Adagio Loudspeakers for less than (or
close to) retail price of a stock pair.
THE
DETAILS:
When
we receive your Adagio loudspeakers (new or used) in for the EXtreme
EXternal upgrade modification, we start by first removing the stock
internal crossover and internal damping materials. We then proceed
to rewire the loudspeaker and connect to a custom mounting plate on
the back of the speaker that contains the Speak-On connector. At
this point we install the new damping material used in the EXtreme
modification and close things up by reinstalling the drivers.
After
assembling and testing the EXternal EXtreme crossovers, we then
connect everything for a minimum 12 hour burn in. After this is
complete, the speakers and crossovers are packed up and sent back to
you for your listening enjoyment.
The
Adagio EXtrenal EXtreme upgrade is available for both the original
Adagio floorstanding system and Adagio Jr. stand mount system.
For
full details on the well received EXtreme Adagio ModWright capacitor
internal crossover, please visit our
EXtreme
Adagio Loudspeaker page or contact us to discuss.
SoniCap: Includes a high-pass filter containing a combination of
Gen I and Platinum Teflon capacitors
ModWright: Includes a high-pass filter containing a
combination of OIMP and Teflon capacitors.
Mundorf: Includes a high-pass filter containing Mundorf
Silver/Oil capacitors
Price
for NEW Extreme Adagio systems with External Crossovers
Adagio
Floor Standing: $5,895 pr. / Add $100 for Mundorf x-over
Adagio Jr: $5,100 pr. / Add $100 for
Mundorf x-over
Price
for modification to customer supplied loudspeakers
Adagio
Floor Standing: $1,795 pr. + return shipping / Add $100 for
Mundorf x-over
Adagio Jr: $1,795 pr. + return shipping /
Add $100 for Mundorf x-over
Sonic Expectations:
The
Adagio EXtreme loudspeakers are voiced for full, fast and accurate
presentation of the entire frequency spectrum, well-defined and
sweeter highs, more emotion and more controlled bass weight. You
will hear more details across the board when listening to vocals,
drums, woodwinds, piano as well as horns.
-
Bass is faster, tighter and more authoritative.
-
The midrange provides the greatest sense of ease and realism
allowing even the smallest subtleties to shine through.
-
Upper frequencies sparkle with more air and extension as well as
greater inner detail retrieval. Many have commented on how much
smoother the upper frequencies are.
* SoniCap crossover provides a very clean, articulate and fast
presentation
* Mundorf crossover provides exceptional air and detail with
just the right amount of warmth
* ModWright crossover provides a presentation that falls between
the SoniCap and Mundorf.
-
There is much more information released at the frequency
extremes.
POLICIES
-
Payment in full is required prior to starting the assembly of
your custom crossovers. Shipping charges will be calculated when
product is complete and invoiced separately. Shipping is
included when you purchase a new pair of EXtreme Adagio
loudspeaker systems.
-
The EXternal EXtreme crossovers carry a 3 year limited
parts and labor warranty to the original owner.
Loudspeaker drivers not covered under the Bella EXtreme
warranty.
