Shown
here is the new dual chassis, stackable
version with external "PowerMax" power
supply.
Each chassis measure 8"W
x 10"D x 4"H and available with various real
wood veneers.
Chassis for the Bella
SE10 single ended amplifier will be slightly
larger than indicated above to accommodate
the transformers measuring 8"W x 10"D x 5"H.
See rendition below.
The analog circuit
chassis will
have the tubes protruding through the top
and can be stacked atop the PowerMax power
supply or side-by-side. If the 'Basis'
preamplifier is ordered with built in 'PhonoMax' phono, both power
supplies can be built into one PowerMax
power supply. Please note that the two
circuits do not share one power supply
rather two separate power supplies are built
into the PowerMax power supply chassis.
Custom half width racks
are available per special order to
accommodate vertical stacking of your full
Musica Bella system! Stay tuned for further
details.
All Musica Bella products
will now come house in this new split
chassis design which includes:
Basis Linestage
PhonoMax stand alone phono stage
Bella SE10 single ended 6L6 stereo
amplifier.
HeadMax headphone amplifier
About the chassis
The new Musica Bella half
size chassis maintains the Baltic Birch
construction that has been used in the past.
Several real wood veneer options are now
available as can be seen below.
Full function remote
preamplifiers will have an optional LED indicator
letting you know which source is currently
in use. The volume utilizes a motorized Alps
volume control. The remote has it's own
dedicated power supply.
Connecting the PowerMax
power supply to the analog circuit will be a
custom built umbilical cord long enough for
both vertical and horizontal placement.
Longer lengths are available upon request.
The
rendition at left shows a Basis preamp with
built in phono stage. The bottom
chassis is the PowerMax chassis housing a
separate power supply for both the signal
and phono circuits. Notice the two power
switches and indicator lights.
The top
chassis features a full function remote,
volume-mute-select. The 4 blue LEDs are part
of the remote source selection. The LED for
the input selected will light to indicate
the source in use.
Shown below is a rendition of the Bella SE10
single ended 10 watt amplifier.
Available wood veneers:
Cherry, Black Walnut, Mahogany, Maple, Oak............call
with special request
