Musica
Bella cables will most likely go against
everything you have ever read in the big
magazines about how a cable should be
designed. Here at Response Audio/Bella
Extreme, we are not ones to follow
trends and be like everyone else.
The development of the MB Series speaker
cables began in 1998 with the goal of
providing an exceptional audiophile
cable at realistic pricing. A pair of
what is now the Bella loudspeaker
cable has been running in our facility
since early 1999.
The Musica Bella MB Series loudspeaker
cables are constructed of high grade
Oxygen Free Copper. Each cable is built
100% by hand using a unique, time
consuming process and are designed to
offer a robust, full bodied presentation
while also bringing forth all the detail
and air that your equipment is capable
of delivering.
Musica
Bella MB Series speaker cables are all
hand made using a very time
consuming process and utilize high
quality, low mass termination.
Based on a high strand count
concept. The more conductors used,
the less the resistance and the
better the signal to your
loudspeakers!
We do not use any type of metal
shield on any of our MB Series
cables. Shielding can increase
capacitance which in turn can roll
off the upper frequency extremes.
All cables are woven using our
unique "Bella Braid"
technique to avoid any RF or EMI
interference.
Single Run
Stereo Pairs
Bella
- Constructed of 6 strands of high
purity Oxygen Free Copper wiring per leg
(24 strands per pair) for an equivalent
14 awg. cable. Also available with both
negative and positive runs in a single
braided arrangement. A great
choice for both home theater and high
end 2 channel applications. Available in
lengths from 4 to 20 feet. On display at
Response Audio
Perfetto
- Constructed of 9 strands of high
purity Oxygen Free Copper wiring per leg
(36 strands per pair) for an equivalent
12 awg. cable. Available in
lengths from 4 to 15 feet.
Musicale
- Our most popular Musica Bella speaker
cable, the
Musicale is constructed of 12
strands of high purity Oxygen Free
Copper wiring per leg (48 strands per
pair) for an equivalent 10.5 awg cable.
Available in lengths from 2 to 15 feet.
On display at
Response Audio
Statement
- The
ultimate, no compromise 8 gauge
loudspeaker cable using 24
strands per leg
(96 strands per pair)
The statement was designed to allow high
power, high current amplifiers to work
at their full potential. .Available in
lengths from 18" to 8 feet.
On Display at
Jam'n Audio
The
Statement
was designed for those who are looking
to bring forth the very best their
system has to offer. The bass is fully
extended and focused. The upper bass and
lower mid-range is rich, deep and solid.
The natural decay and resonance of
instruments like the sax, piano and
acoustic guitar are extremely accurate
and tonally pure. Midrange is absolutely
phenomenal with ultimate realism. The
hues and texture of the human voice has
limitless texture and tonality. The
frequency extremes are fully extended,
transparent and tonally perfect.
The "Statement" loudspeaker cable is a
very labor intensive and time consuming
cable to build. Please allow 2 to 4
weeks for delivery of lengths over 5
feet.
To
realize the full potential of the
Statement interconnect cables, we
recommend they be mated with the
Statement
interconnect cables.
Bi-Wire
Loudspeaker Cable
Also
available is the MB Series bi-wire
speaker cables. MB Series bi-wire cables
are constructed in a shotgun design. The
MB 14/14 utilizes two separate Bella
runs for each the upper and lower
frequencies tied together at the
amplifier end. The MB 12/12 is the same
construction as the MB 14/14 except for
the use of two separate runs of Perfetto
cable. The MB 12/14 uses a run of
Perfetto for the lower frequencies with
separate run of Bella for the upper frequencies.
The MB 12/14 is a popular bi-wire
speaker cable for use in conjunction
with vacuum tube amplifiers.
Shown
at left:
Far left: Musica Bella
"Bella"
speaker cable connected to Eventus Audio
Phobos loudspeaker. Close left:
The "Statement" speaker cable
connected to Phobos loudspeaker.
MB Jumpers
MB Jumpers are 6" or 12" lengths of MB Series
speaker cable used as jumpers to
replaced the cheap metal jumpers
supplied with many loudspeaker systems
that have bi-wiring capability. Please
let us know at the time of ordering what
termination combinations are required to
best suit your loudspeaker/cable needs.
MB Series loudspeaker cables are available with
your choice (or combination of) high
quality gold plated solid copper spade
or banana termination.
The MB Series loudspeaker cables are the
perfect mate for the
Musica
Bella MB Series interconnect cables
shown left.
